![]() Now, be sure this button is not engaged on the bass guitar or kick drum. This should always be engaged on vocals and also comes in handy for instruments that do not need to be in this space, such as the electric guitar. When this button is engaged, it will cut out the super-low frequencies, usually those under 100Hz. On most mixers, at the very top is a button for the high pass filter. You will then notice that the vocal becomes more clear and the instruments are allowed to shine in that frequency range. There is really nothing pretty about letting this frequency range come through on a vocal, so you might as well take quite a bit out. The main use for this knob is to cut the lows out of vocals. The low frequency knob allows you to adjust those super-low frequencies - mainly the ones that flow through subwoofers. If more EQ is needed, you will need to connect an external EQ processor, which will allow much greater flexibility than what you mixer as to offer. Unfortunately, your mixer’s EQ will only allow you to fix one, so choose the biggest problem. There are times when more than one frequency range is causing the problem. Now, use the level knob to cut the troublesome frequency range until you get the desired sound. Now, use the frequency knob to sweep through the frequency spectrum and find which range of frequencies is louder than the others. To start things off, turn the level knob up significantly. These two knobs should be your first step when fixing a frequency problem. You will probably have to expand your thinking around these two knobs because they not only allow you to adjust mid frequencies, but also what you would consider to be high and low frequencies as well. One knob controls the level of the frequency whereas the other knob lets you choose the exact frequency range you are cutting or boosting. Most mixers have two knobs to help you control mid frequencies. Of course, don’t be afraid to experiment with it, but again, use it as a last resort instead of the first. I have not found very many applications where you would actually want to use this knob. I tend to leave the high frequency knob in it’s default position, 12 o’clock. There is no reason to give these things up if you don’t have to. When you try to cut this out with the high frequency knob, you also cut out all the frequencies that bring clarity and brilliance to the sound. Harshness is generally around the 1k frequency range. You may find yourself reaching for this knob when you hear something harsh that needs to be cut, but this is not the right response and let me tell you why. The first EQ knob on your mixer is for high frequencies. Now that you understand this important concept, let’s dive in to making the most of your mixer’s EQ. ![]() There are times when boosting frequencies is the right plan of action, but think of it as the last resort instead of the first. What this does is brings up the lower frequencies while keeping the mid-high frequencies where they were. Start by cutting mid-high frequencies and then you can then turn up the overall volume. So, if a vocal sounds thin, there is probably too much going on in the mid-high frequency range. Instead, it is better focus on cutting frequencies. For example, if the vocal doesn’t sound full enough, they start by boosting the lows. The first mistake people make is to boost the frequency they think is missing. Focus on cutting frequencies, not boosting them. But, before we get into how to use your mixer’s EQ, let’s first go over the most important concept when it comes it comes to EQ. EQ may seem like a simple concept, but as you may have found, it is quite the task to get it just right. If you are not quite sure how to effectively use EQ, I promise, you are not alone. ![]()
0 Comments
Leave a Reply. |